Wednesday, February 20, 2013

Cd Case Greenhouse


I originally made this greenhouse last year. But thought I'd repost it because spring is right around the corner and this little greenhouse would make the perfect place to start seeds or showcase some spring bulbs that still need a little extra protection from the cold. Plus earth day is coming up and it's a great reuse project for old CD cases!


The tutorial is pretty long... but don't get scared off because the greenhouse really isn't difficult to make. There are lots of details I wanted to be sure were explained clearly. To do that I had to break this down into a bunch of steps and include a lot of pictures. The toughest part about the whole project is cutting the cases into angles- and even that's not really hard to do, it just takes some patience. The rest of the project is just gluing!

Here's what you'll need to make it:
  • Old CD Cases- it takes 40 to make a greenhouse this size (about 11"x 18" x 20") but you'll also want some extras in case a few break while being cut (I broke 2).
  • Plastic Glue- that dries clear.
  • Painter's Tape
  • Safety Glasses
  • Tweezers
  • You'll also need a craft knife, ruler and cutting board, and a large flat surface (that can get a bit of glue on it) for the cases to lay on while drying.
Step 1: Preparing The Cases

Start with clean cd cases. More than a few of mine needed a bit of dusting off and some old price tags removed. Since most of my cases also had black plastic disc holders in them, and I only needed the clear parts of the cases, I removed and discarded the black plastic. When you remove the disc holders you'll notice it leaves an open space near the hinge. I'll talk more about this in Step 2, I just wanted to point out that this is normal and nothing to worry about.

I also came across a few cases that had clear disc holders. The circular pattern reminded me of the fans you see in large greenhouses so I left those whole and used one on either end in the center of the wall's peak.

Step 2: Making The Walls

You'll need to make four walls for the main part of the greenhouse. The two end walls are each made from four cd cases. The side walls are made from six cases each.

Since the cases are rectangular, not square, it's important that they are oriented the same way. All the walls have the hinges either on the left or the right, never on the top or bottom.


Before glueing anything lay the cases out and decide if the hinges are going to be on the left or the right. And remember the open space near the hinge I mentioned? Make sure on each case that open space faces down, that way you'll have one side of each wall that's smooth solid plastic.

For my end walls I chose to have the two cases on the left have the hinges on the left. The two cases on the right have the hinges on the right. I thought this arrangement made a nice pattern, but you could place them so that the hinges all meet in the middle- do whatever you think looks nice!

For the side walls I arranged it so cases on the left had the hinges facing left, cases on the right had hinges facing right. The cases in the middle alternated. On one wall the hinge for the case in the bottom row faced left and the hinge for the top row case faced right. In the second wall I flip flopped it, the bottom case had the hinge face right and the top faced left.

Once the pattern has been decided, the cases can be glued together.

Start by making the two end walls (4 cases each) then make the two side walls (six cases each). Apply glue to the edges wherever a case touches another case. Line them up carefully so the walls are even and leave them laying flat until dry.


Step 3: Attach The Center CD To The Wall's Peak

The last whole cd case to go on the end walls is what I like to think of as the center or focal point of the peak. It's where I used the cases that have the disc holders still in them.

Once the glue on the end walls has set enough that you can touch the walls without disturbing the alignment you can move on to this step.

Place the cd case in the middle of the wall- use a ruler to be sure it's centered. Glue into place.


At this point I recommend letting the walls dry overnight before moving to the next step. You really want the cases to be nice and secure when you start cutting angles!

Step 4: Cutting Cases For The Wall Peak

Believe it or not you can cut cd cases with a craft knife (it just takes a bit of patience). 

But first things first- before cutting any cases you'll want to put on safety glasses. When the cases are being scored and snapped there's always the possibility that little shards of plastic can go flying. Those little bits of plastic can be just as sharp as glass... and you really don't want one of them in your eye!


The most important part of this step is getting the angles accurate. Starting with the right corner of the peak place a whole case in the empty space (with the hinge facing the left and the open space facing down).

Lay a ruler across the case so that the edges line up with the corner of the full cases next to it and below it. Use your craft knife to score a line across the case that's going to be cut.


Once the case is marked, flip it over and line the ruler up so it looks like it matches the line you've already scored on the other side. Then score a new line on this side of the case. Now that both sides are marked with a line, open the case up so it lays flat and score matching lines on the inside.


Using a fair amount of pressure, repeatedly cut over all the lines on the front, back, inside, and outside of the case. You'll also need to cut the plastic on the edges of the case, where the front and back lines match up. After you've gone over the lines several times the case will begin to cut all the way through in some spots. When this happens the case can be snapped. To do this, carefully apply pressure along both sides of the score line until the case snaps cleanly.


It may take a little practice- I broke two cases before getting it right. The two most important parts were making sure the harder plastic on the edges of the case were scored enough and changing the blade when it got dull.

Once the case is cut you'll notice that the two pieces don't hold together very well and that there's no support at the tip of the angle. To fix this, first take a leftover part of the case and cut a piece off the edge.


Go back to the angle piece that you just cut and glue the edges of the case together. Then, using your tweezers, glue the leftover edge piece in between the front and back of the case to support the top.


Repeat for the left side, making sure the hinge of this case is on the right and that the open space is facing down. Glue both pieces into place.


To make the top of the peak you'll need to cut a triangle. It's done the same way as the side pieces, only this time to mark the angle you'll place the ruler along the corner pieces that were just cut.






Step 5: Gluing The Walls Together

Once all 4 walls have dried stand them up and face each wall so the open spaces are on the inside. It's a little harder to glue this way- but the result is a nice smooth wall on the outside.


Glue the edges of the walls, holding them in place with tape until the adhesive dries.

Once the glue has set you may notice gaps or weak areas; if that's the case, use your glue like caulk to reinforce the joints. Run a bead of glue up the inside corners where each wall meets. Immediately wipe most of the glue away with a paper towel, moving from the bottom of the wall in a straight line towards the top while applying a little pressure with your finger. This will force the glue into the gaps and remove any excess.

Step  6: Making The Peak Of The Roof

To make the top of the roof four cd's are bent in half and lined up to form a peak.


In order for the roof to lay flat against the end walls the plastic edge on the short side of the case (the part that's opposite the hinge) needs to be cut off. Here I've shown one cd with the plastic cut off next to another cd with the plastic still on.


Once all four cd's are cut it's time to set the angle of the roof. I thought this step was going to be difficult but it turned out to be very easy. Put some glue on the hinges of two cd cases. Balance one on the top of of each end walls and let them dry in place.


Once the glue has dried it will keep the case at the correct angle, and now it can be used as a template to set the angle on the last two cases needed for the peak.

Remove the cases from their balancing place on each wall and set them on the flat surface. Before you glue all four cases together line them up so the openings alternate sides. The cases seemed to fit together more evenly this way.


Glue the other two cases to the ones that have already been glued into an angle, using tape to keep the angle matched until the adhesive is dry. When those two pairs have set, glue all the cases together, and you'll have four cases for the top of the roof at the correct angles.

When that piece is dry it can be centered on top of the walls and glued into place.

Step 7: Finishing The Roof With Folding Panels

This last part was so much fun! I think it's the finishing touch that really makes this little greenhouse sing.

You'll need four cases for each side of the roof. Open the cases so they are laying flat, and glue the edges together to make a panel. Be careful not to get glue into the hinge or else your panels won't be able to fold up once they are dry.


You'll notice that on one side of each case there are three raised plastic edges, the other side of the case has two raised edges and one flat edge. I placed the panels on the roof so that the side with the flat edge was at the bottom closest to the walls. But you can place the panels however you'd like- it's an aesthetic choice.

Place the panels so they overlap the roof's peak, cover the open area of the roof, and overhang the walls just a little. Be sure the flaps fold up or else you won't have panels that open for watering and ventilation! Glue along the top as well as the front and back sides (again it's important to not get glue in the hinges or else the flaps won't open). Use tape to hold the panels in place until the glue dries.


When the glue is dry remove all the tape and you'll have an incredibly light, very strong, kinda cute little cd case greenhouse!






91 comments:

  1. Leave it to YOU! To come up with both an inexpensive solution to create a small space green house AND to put all those plastic CD cases to good use!!

    We need a small green house to use in winter to keep our orchids warmer - this just might do the trick!!!

    ReplyDelete
    Replies
    1. Thanks Pam,
      This would be the perfect place for orchids!

      Delete
  2. it's gorgeous! are these the thin cases or thick ones? i might try it...

    ReplyDelete
    Replies
    1. Thanks so much! These are the thick cases. I think you could glue the thin ones together but I'm not sure if it would be stable enough to make a greenhouse this size. If you try it I'd love to see a picture! : )

      Delete
  3. Thanks Meg. I made one! FB page: www.facebook.com/splendor.nl

    ReplyDelete
  4. Wow. This is really creative. keep it up

    ReplyDelete
  5. I made one using masking tape and didn't bother cutting the CDs to size because it's just for propogation and wind protection

    It looks a mess but should do the trick ��

    ReplyDelete
  6. how is lucy 's head coming out of the floor???? XD

    anyway i love the idea

    ReplyDelete
  7. You will have not intended to do so, but I think you’ve managed to express the state of mind that quite a lot of consumers are in. The sense of wanting to assistance, but not knowing how or where, is one thing a lot of us are going via. mini greenhouse

    ReplyDelete
  8. Thanks for teachinng the best thing to make my garden beautiful. I think a garden without mini trampoline for kids is like deserted.

    ReplyDelete
  9. Darling AND effective on so many levels! Thanks for sharing this!! I love it! These will go on my deck for hardening off seedlings!👩‍🌾

    ReplyDelete
  10. Thank you for your post, I look for such article along time. myself very happy to read it because it can give me more insight, thanks.. Visit my blog..thankyou

    Megawin88
    Dewaslot777
    Mpo444
    Win777 Slot

    ReplyDelete
  11. Thank you for your post, I look for such article along time. myself very happy to read it because it can give me more insight, thanks.. Visit my blog..thankyou

    Gacor 777 Slot
    Asia Slot 888
    Indoslot777
    Lux88 Slot

    ReplyDelete
  12. I just loved your article on the beginners guide to starting a blog.If somebody take this blog article seriously in their life, he/she can earn his living by doing blogging.

    Mega77 Slot
    Judi Slot88
    Hokibet77
    Naga slot

    ReplyDelete
  13. Hi there!

    That's a very nice article and blog, I found it informative and useful, hope to read more nice posts like this one around here,

    Keep sharing the best content,

    Your follower

    Salvatore from Visite Foz do Iguaçu e Conheça as Cataratas do Iguaçu Compre seu Ingresso Online no Tour Cataratas.

    .
    .
    .
    .
    .

    ReplyDelete
  14. Thanks For Sharing Your article It is very useful, dont forget to visit my blog Slot88

    ReplyDelete
  15. Pretty nice post. I simply stumbled upon your blog and wanted to say that I have truly enjoyed browsing your weblog posts. Luxury Kitchen In Dubai

    ReplyDelete
  16. Great blog. Keep sharing the great article.

    ReplyDelete
  17. What a creative inventions! The drywall companies in georgia was so impressed!

    ReplyDelete
  18. It's a creative and eco-friendly way to repurpose old CD cases just in time for spring and Earth Day. The greenhouse would be a fabulous spot to start seedlings or give a little extra protection to delicate spring bulbs. The step-by-step tutorial is so well explained with ample details and pictures that I can try this project myself!

    ReplyDelete
  19. I have always been interested in gardening, and this looks like a fun way to start seeds and grow plants, even in a small space. I especially appreciate the detailed instructions and tips for cutting the cases, as that can be tricky.

    ReplyDelete
  20. Oh my goodness, this CD case greenhouse is such a brilliant idea! Last spring, I made a similar mini greenhouse for my succulents using VHS tape cases (I know, a blast from the past, right?), but I never thought of using CD cases. This project is perfect for Earth Day and gives new life to those old CD cases gathering dust in my garage. I'll definitely be trying this out for my seedlings this year.

    ReplyDelete
  21. "Thank you for sharing this.

    Accountants Winnipeg

    "


    ReplyDelete
  22. I am so thankful to you for taking your valuable time to post an amazing information. I'm am really satisfied with this great post.
    how long does a uncontested divorce take in virginia

    ReplyDelete
  23. Anda bisa dengan mudah bergabung melalui agen resmi slot MEGA303 bonus besar indonesia. Semua jenis permainan bisa dimainkan dengan bebas di sini. Jadi siapapun yang menjadi member disini bisa menikmati permainan dengan puas dan bebas. Gunakan tautan slot online MEGA303 untuk terhubung ke game dengan cepat. Berikut adalah beberapa penjelasan singkat untuk Anda semua Berikut adalah beberapa penjelasan singkat untuk Anda semua.

    ReplyDelete
  24. I've always been intimidated by DIY projects, but the detailed explanations and step-by-step pictures make it seem so doable. The author's personal experience of breaking a couple of cases during the cutting process reassures me that mistakes happen and it's all part of the learning curve. I'm excited to celebrate Earth Day by reusing old CD cases and creating my own little sanctuary for seeds and spring bulbs.

    ReplyDelete
  25. This CD case greenhouse tutorial is incredibly detailed and thorough, making it easy to follow along and create a wonderful reuse project. I can imagine the excitement of preparing the cases, carefully gluing them together, and feeling a sense of accomplishment as the walls take shape. The cutting process might require some patience and practice, but the end result—a light, strong, and cute little greenhouse—is definitely worth it!

    ReplyDelete
  26. Terrific piece with some great suggestions.
    I appreciate all of your effort and providing this excellent blog.
    virginia statute of limitations personal injury

    ReplyDelete
  27. It was very informative. Thank you for sharing.
    https://treeservicebrokenarrow.net

    ReplyDelete
  28. Wow, what an ingenious way to repurpose old CD cases! I remember making a similar greenhouse last spring, and it served as a perfect mini oasis for my seedlings. The whole project was both environmentally friendly and extremely satisfying—especially when I saw my first sprouts peeking through.

    ReplyDelete
  29. Thanks for sharing this content! amicoglobal.com/

    ReplyDelete
  30. Wow. This appears to be really innovative! I'm sure our fencing company would promote this to their clients when they see this.

    ReplyDelete
  31. Thanks for sharing beautiful content. I got information from your blog.keep sharing

    ReplyDelete
  32. Turning old CD cases into mini greenhouses is such an ingenious and eco-friendly idea! It's a perfect example of upcycling and making the most out of what you have. I love how this simple DIY project can contribute to a more sustainable lifestyle. It's a small step that can have a big impact on our environment. Thanks for sharing!
    abogados de divorcio sin oposición en virginia beach

    ReplyDelete
  33. Love the greenhouse, looks like great quality. https://winnipegpaintingtechs.com

    ReplyDelete
  34. Thank you for sharing this post! Resin paving offers several design choices. resin-driveways-edinburgh

    ReplyDelete
  35. The writing style is captivating, and the way the author weaves personal anecdotes into the narrative adds a touch of humanity that makes the article even more compelling. I look forward to reading more from this talented writer.

    https://www.seo-tampa.org

    ReplyDelete
  36. Our huddersfield driveways team think this is such a creative idea!

    ReplyDelete
  37. We are specializing in projects that will last a lifetime. We do not rush our jobs nor do we default on a deadline. We pride ourselves on experience, hard work and roofing knowledge. A&G roofing and restoration is a reliable and dependable metal roofing.

    ReplyDelete
  38. Thank you for sharing this great content here. pool company Germantown

    ReplyDelete
  39. terima kasih sukses selalu. keren blognya👑 salam jp

    Fendi88

    ReplyDelete
  40. terima kasih sukses selalu. mantap blognya👑 salam jp Alexaslot138 Slot Hongkong

    ReplyDelete
  41. Wow! I think my old cd case will not go to waste after seeing your diy project. www.clarksvilledrywall.com are so impressed by the end result!

    ReplyDelete
  42. Wow! This is awesome. Thanks for sharing your creativity and talent to us. Savannah Masonry Savannah Georgia

    ReplyDelete
  43. I like the content, it's definitely a great talent. Roofer

    ReplyDelete
  44. It's stunning! Are these the slim cases or the thicker ones? I might give it a try...
    ISO 27001 Lead Auditor Training

    ReplyDelete
  45. Thanks for sharing here an informative post. lawn service

    ReplyDelete
  46. The use of imagery on your blog is captivating. It adds an extra layer of engagement to your already fantastic content.

    SEO Services Tampa

    ReplyDelete
  47. The design of your blog is a testament to your dedication to providing a top-tier experience for your readers. It's a pleasure to engage with such a well-crafted platform.

    https://stonevalleymeadows.com

    ReplyDelete
  48. It's nice seeing this awesome information here. forestry mulching

    ReplyDelete
  49. This is great! Thank you so much for sharing this one.
    Other

    ReplyDelete
  50. I love how creative this blog. Keep on posting.
    General info

    ReplyDelete
  51. As Earth Day approaches, your project serves as a fantastic example of repurposing and reusing materials, contributing to a more sustainable and eco-conscious lifestyle. It's a wonderful way to celebrate both the changing seasons and our commitment to the environment.

    The Rocky Mountain Oils essential oil car diffuser is a convenient and effective way to enjoy the benefits of aromatherapy while on the go. This compact device easily fits into your car's cup holder and diffuses your favorite essential oils, creating a soothing and refreshing atmosphere during your commute or road trips. With its sleek design and ease of use, it's the perfect companion for anyone looking to enhance their car journeys with the power of essential oils.
    Visit this Article: https://www.rockymountainoils.com/products/aromatherapy-hanging-car-diffuser

    ReplyDelete
  52. This comment has been removed by the author.

    ReplyDelete
  53. What are The Divorce Laws in New York State Your succinct summary of the divorce rules in New York State is very beneficial! It's admirable how you can distill intricate legal knowledge into concise, easily understood principles. Your site has turned become my go-to source as I work through this process. I appreciate your skillful simplification of a difficult subject!

    ReplyDelete
  54. It's a great shared content. Nice work! Zion Roof Pros Roofing Company

    ReplyDelete
  55. I express my gratitude for the informative article; your willingness to share this information is greatly acknowledged.

    ReplyDelete
  56. Thank you for always sharing here an informative content. epoxy flooring sunshine coast

    ReplyDelete
  57. What a brilliant idea to use CD cases as mini greenhouses! Not only is it a clever way to repurpose old materials, but it also provides a convenient and affordable way to start seeds and grow plants indoors. how to extend a protective order in virginia

    ReplyDelete
  58. Thank you for always sharing here an informative blogs. concrete stain floors

    ReplyDelete
  59. I find this site very interesting, I like the content being shared here. concrete company

    ReplyDelete

Related Posts Plugin for WordPress, Blogger...